Chemical Engineering

Queen's University Belfast

Queen's University Belfast

School of Chemistry and Chemical Engineering

Location
Belfast, United Kingdom
Funding
Funded Studentship
Application deadline
See university guidance

About the project

  • Share Facebook Twitter Linkedin Email
  • Facebook
  • Twitter
  • Linkedin
  • Email
  • Postgraduate Research 2026
  • PhD Opportunities
  • Find a PhD Supervisor

Chemical recycling of polymers

  • Chemical recycling of polymers: School of Chemistry and Chemical Engineering | PHD
  • Project details
  • Subject information
  • Course content
  • Entry Requirements
  • Fees and Funding
  • Apply

Overview

Scope: Polyethylene terephthalate (PET) is among the most abundant plastics, used - for example - in beverage bottles and sports clothes. Although there is perception that PET is easily recycled by mechanical means, in 2022 only 30% of UK’s PET bottles, and negligible percentage of garments, were recycled. About 75% of PET collected for recycling is rejected before it reaches the processing stage. Within the 25% that reaches recycling, only 17% is returned to bottles, and over 50% ends up in fibres, which are not recycled. While mechanical recycling is an important avenue for extending life cycles of polymers, it yields inferior quality product after each iteration. In contrast, chemical recycling breaks polymers down to building blocks (monomers), which can then be used in the synthesis of recycled polymers of quality equal to virgin products.

PET depolymerisation can be achieved through the reaction with alcohol or water, and is catalysed by a wide range of acids and bases. The challenge is to find a catalyst that enables easy product separation, can be recycled and is inexpensive. Furthermore, it should be robust to handle contaminated waste and polymer blends. Preliminary results for PET alcoholysis have been very promising. This project will focus on the use of inexpensive ionic liquids based on sufluric acid and amines, developed in the Swadzba-Kwasny group, for the chemical recycling of real-life polymeric waste (PET, polyurethanes and spandex) and their composites. Candidates must possess or expect to obtain, a 2:1 or first-class degree in Chemistry, Chemical Engineering or closely related discipline Candidates must be available to start the post by October 2025 For more information, please contact: Prof. Gosia Swadzba-Kwasny (m.swadzba-kwasny@qub.ac.uk)

Professor Gosia Swadźba-Kwaśny

Full-time: 3 years

Chemistry overview

The School of Chemistry and Chemical Engineering aims to promote sustainable processes and materials to meet the energy and healthcare demands of the future. The School is expanding rapidly and this is creating many new and exciting research opportunities with over £15m being invested to develop and expand the core research areas of catalysis, biological and medicinal chemistry, and materials. Mode of study / duration Registration is on a full-time or part-time basis, under the direction of a supervisory team appointed by the University. You will be expected to submit your thesis at the end of three years of full-time registration for PhD, or two years for MPhil (or part-time equivalent). Mode of Study is on campus.

QUB is a member of the Russell Group of the UK’s 24 leading research-intensive universities.

  • QUB is ranked 199th in the world in the QS World University Rankings 2026 QUB is ranked =13th in the UK for research intensity QUB is ranked 9th in the UK for Graduate Prospects – Outcomes (Complete University Guide 2026)
  • Over 99% of Queen’s research environment was assessed as world-leading or internationally excellent in REF2021 88% of research submitted by Queen’s has been assessed as world-leading or internationally excellent in REF2021
  • 83% of Research Impact case studies by the School has been assessed as world-leading or internationally excellent REF2021, placing it among the top UK universities for Research Impact

Course content

Associated Research Much of our research falls under the broad headings of Healthcare and Sustainability, examples of recent funded projects include development of novel antibiotics and reduction of single use plastics. The School also leads the EU-funded Bryden Centre for renewable energy research, the industry-led Centre for Advanced Sustainable Energy (CASE) as well as our world-leading QUILL ionic liquids research centre. Students trained in our School are equipped with the skills that allow them to go out and make a real difference in the world. Our areas of interest include adventurous research at the cutting edge of catalysis (where chemistry meets other disciplines, especially engineering, innovative Molecular Materials and Functional Materials), ionic liquid technology (‘super solvents' which do not form vapours and can be used as non-polluting alternatives to conventional solvents) and Synthesis and Biological Organic Chemistry (working to deliver compounds addressing the regulation of cellular functions). QUILL (Queen's University Ionic Liquid Laboratories): the largest multidisciplinary research group in the world centred on ionic liquid technology, whose work on ‘super solvents' (which do not form vapours and can be used as non-polluting alternatives to conventional solvents) was voted ‘Most Important British Innovation of the 21st Century' in 2013. All of our research groups have significant links with researchers and other institutions globally, and there are opportunities for collaboration and study visits, etc. We have extensive links with industry, meaning that employment prospects for our graduates are excellent. Much of our research is interdisciplinary, and our students can broaden their experience and knowledge by working with researchers from other disciplines (eg biologists, physicists).

Introduction For further information on career opportunities at PhD level please contact the Faculty of Engineering and Physical Sciences Student Recruitment Team on askEPS@qub.ac.uk. Our advisors - in consultation with the School - will be happy to provide further information on your research area, possible career prospects and your research application.

Professor John Holbrey Director of Postgraduates Chemistry&Chemical Engineering Email: J.Holbrey@qub.ac.uk

Entrance requirements

Graduate The minimum academic requirement for admission to a research degree programme is normally an Upper Second Class Honours degree from a UK or ROI HE provider, or an equivalent qualification acceptable to the University. Further information can be obtained by contacting the School.

For information on international qualification equivalents, please check the specific information for your country .

Evidence of an IELTS score of 6.0, with not less than 5.5 in any component, or an equivalent qualification acceptable to the University is required (taken within the last 2 years).

International students wishing to apply to Queen's University Belfast (and for whom English is not their first language), must be able to demonstrate their proficiency in English in order to benefit fully from their course of study or research. Non-EEA nationals must also satisfy UK Visas and Immigration (UKVI) immigration requirements for English language for visa purposes.

For more information on English Language requirements for EEA and non-EEA nationals see: www.qub.ac.uk/EnglishLanguageReqs .

If you need to improve your English language skills before you enter this degree programme, INTO Queen's University Belfast offers a range of English language courses. These intensive and flexible courses are designed to improve your English ability for admission to this degree.

Tuition Fees

Northern Ireland (NI) 1 | TBC

Republic of Ireland (ROI) 2 | TBC

England, Scotland or Wales (GB) 1 | TBC

EU Other 3 | £28,900

International | £28,900

1 EU citizens in the EU Settlement Scheme, with settled or pre-settled status, are expected to be charged the NI or GB tuition fee based on where they are ordinarily resident, however this is provisional and subject to the publication of the Northern Ireland Assembly Student Fees Regulations. Students who are ROI nationals resident in GB are expected to be charged the GB fee, however this is provisional and subject to the publication of the Northern Ireland Assembly student fees Regulations.

2 It is expected that EU students who are ROI nationals resident in ROI will be eligible for NI tuition fees. The tuition fee set out above is provisional and subject to the publication of the Northern Ireland Assembly student fees Regulations.

3 EU Other students (excludes Republic of Ireland nationals living in GB, NI or ROI) are charged tuition fees in line with international fees.

All tuition fees quoted relate to a single year of study unless stated otherwise. All fees will be subject to an annual inflationary increase, unless explicitly stated otherwise.

More information on postgraduate tuition fees .

Chemistry costs

Additional course costs

Depending on the programme of study, there may also be other extra costs which are not covered by tuition fees, which students will need to consider when planning their studies . Students can borrow books and access online learning resources from any Queen's library. If students wish to purchase recommended texts, rather than borrow them from the University Library, prices per text can range from £30 to £100. Students should also budget between £30 to £100 per year for photocopying, memory sticks and printing charges. Students may wish to consider purchasing an electronic device; costs will vary depending on the specification of the model chosen. There are also additional charges for graduation ceremonies, and library fines. In undertaking a research project students may incur costs associated with transport and/or materials, and there will also be additional costs for printing and binding the thesis. There may also be individually tailored research project expenses and students should consult directly with the School for further information.

Some research programmes incur an additional annual charge on top of the tuition fees, often referred to as a bench fee. Bench fees are charged when a programme (or a specific project) incurs extra costs such as those involved with specialist laboratory or field work. If you are required to pay bench fees they will be detailed on your offer letter. If you have any questions about Bench Fees these should be raised with your School at the application stage. Please note that, if you are being funded you will need to ensure your sponsor is aware of and has agreed to fund these additional costs before accepting your place.

How do I fund my study?

Find PhD opportunities and funded studentships by subject area.

We offer numerous opportunities for funded doctoral study in a world-class research environment. Our centres and partnerships, aim to seek out and nurture outstanding postgraduate research students, and provide targeted training and skills development.

The Government offers doctoral loans of up to £26,445 for PhDs and equivalent postgraduate research programmes for English- or Welsh-resident UK and EU students.

Information on Postgraduate Research scholarships for international students .

The Funding & Scholarship Finder helps prospective and current students find funding to help cover costs towards a whole range of study related expenses.

How to Apply

Apply using our online Postgraduate Applications Portal and follow the step-by-step instructions on how to apply .

If you're interested in a particular project, we suggest you contact the relevant academic before you apply, to introduce yourself and ask questions.

To find a potential supervisor aligned with your area of interest, or if you are unsure of who to contact, look through the staff profiles linked here .

You might be asked to provide a short outline of your proposal to help us identify potential supervisors.

Download Postgraduate Prospectus

Research areas

Chemical EngineeringChemical engineeringMaterials ScienceengineeringEngineeringScience

Related PhD opportunities

PhD Chemical Engineering

Machine learning for chemical manufacture

University of Leeds

It is an unceasing challenge to reduce the time scale for development of new chemical products to the point of reliable manufacture and…

Location
Leeds, United Kingdom
Deadline
Funding
See university guidance